Cleaning Fiberglass With Acetone

Use Acetone to Remove Your Toughest Stains on Fiberglass Surfaces

Fiberglass surfaces, like other surfaces, are susceptible to stains. From rust stains to soap scum, fiberglass attracts it all. Acetone removes not only dirt and grime from your fiberglass surfaces, but also any set-in stains like rust and pen marks. Anyone who has fiberglass surfaces in their home or who uses fiberglass in their recreational vehicles should keep a supply of bulk acetone in stock.

Acetone is a great solution for cleaning fiberglass shower, or cleaning fiberglass rv, or cleaning a fiberglass boat, acetone is a great all purpose stain remover for fiberglass. Here’s the general steps in using acetone as a fiberglass stain remover.

1. Put on a pair of latex gloves to protect your skin from the acetone.
2. Pour 5 tbsp. of acetone into a bucket.
3. Dip a white cotton cloth into the acetone. Remove the cloth and wring out excess acetone.
4. Wipe the fiberglass surface with the acetone-soaked cloth.
5. Apply light pressure to remove any stains from the fiberglass surface.
6. Wet a white cotton cloth with warm water from a sink. Wring out excess water.
7. Wipe the fiberglass surface with the damp cloth to remove acetone residue.

Acetone In Action – Cleaning Fiberglass Surfaces

Fiberglass Boat Cleaning and Cleaning a Boat Hull Using Acetone

Acetone is a great fiberglass cleaner for boats. If you have stubborn stains on your hull or deck, or anywhere on your boat, try using acetone after more milder claiming products have failed. Check out this video to see just how effective acetone is for cleaning fiberglass boats.

Acetone To Clean Boston Whaler Rub Rail Tracks

As you see, cleaning fiberglass sections of the boat is as easy as just pouring a small amount of acetone on a rag and wiping it over the stain. Acetone will probably remove the stain, but consider that it will also remove any wax in that area, This won’t hurt the gel coat in any way, but if you use strong products like this on gel coat, always follow up with another coat of wax in that section.

Acetone in the Bathroom

Acetone is great for cleaning the most stubborn stains in your fiberglass bathtub or shower. Here’s some great tips on how to clean a fiberglass shower or how to clean a fiberglass tub.

Here’s how to remove tough stains from fiberglass in the bathroom

• Baking soda and water. When dealing with the build-up of soap scum, it can be hard to remove with regular bathroom cleaners. Prepare a mixture by combining baking soda and water to create a paste. Dab the paste on the areas with soap scum. Let it sit for a few hours and rinse off with warm water.
• Vinegar. For stubborn soap scum, you need to use an acid such as vinegar to dissolve it. Soak a cloth or towel with vinegar and saturate the site for up to an hour. After removing the cloth or towel, clean the area with warm foamy water and a soft sponge.
• Hydrogen peroxide. When dealing with dark stains, you can use hydrogen peroxide. Position several layers of clean white towels over the stain and pour hydrogen peroxide on top. Let it soak
• Acetone. Persistent stains can be removed with acetone or paint thinners. Soak a clean white towel or cloth with the solution and carefully rub the stain until it completely fades. Just make sure that these solutions are used sparingly.

Why Use Acetone on Fiberglass?

Don’t spend big money on custom packaged fiberglass stain removers or perfumed bathroom cleaners, use affordable, effective, and safe acetone on any stubborn stains on your fiberglass surfaces.